2013年7月15日星期一

Le plus récent matériel de formation CompTIA JK0-702

Le test CompTIA JK0-702 est l'un très improtant dans tous les tests de Certification CompTIA, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.


Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.


Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.


Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.


Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.


Code d'Examen: JK0-702

Nom d'Examen: CompTIA (CompTIA E2C A+ Practical Application (2009 Edition) Exam)

Questions et réponses: 904 Q&As

Avec l'aide du Pass4Test, vous allez passer le test de Certification CompTIA JK0-702 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de CompTIA JK0-702, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.


JK0-702 Démo gratuit à télécharger: http://www.pass4test.fr/JK0-702.html


NO.1 A user reports that their computer is running considerably slower after visiting a website. The user's PC
has a current antivirus package that is running correctly.
Which of the following should the technician do FIRST in order to diagnose the problem?
A. Clear the web browser history.
B. Run an anti-spyware tool.
C. Defrag the user's hard drive.
D. Run the CHKDSK utility.
Answer: B

CompTIA   JK0-702   JK0-702   JK0-702

NO.2 Which of the following is the effective bandwidth of a 100BASE-TX network card when full-duplex is
enabled?
A. 50MBps
B. 100MBps
C. 200MBps
D. 1000MBps
Answer: C

certification CompTIA   JK0-702   JK0-702   JK0-702   JK0-702

NO.3 A technician is setting up a secure SOHO network.
Which of the following items needs to be setup on the network?
A. SSID, encryption type, MAC security, encryption key
B. SSID, wireless access point, encryption type, encryption key
C. SSID, encryption type, encryption key, a channel
D. SSID, WEP 128, MAC security, a channel
Answer: C

certification CompTIA   JK0-702   certification JK0-702   certification JK0-702

NO.4 A customer cannot print certain PDF documents on their laser printer. The print job in is a multi-page
large PDF with multiple colors.
Which of the following is the MOST likely solution?
A. Change the driver from PCL to Post Script.
B. Update the printer firmware to handle larger jobs.
C. Add additional memory to the laser printer.
D. Add additional memory to the computer.
Answer: C

certification CompTIA   JK0-702   JK0-702   certification JK0-702   JK0-702

NO.5 A technician's system is displaying the error message 'Missing operating system'. The system will not
boot up.
Which of the following is the MOST likely cause of the error? (Select TWO).
A. The MBR is not reading the volume boot record (VBR).
B. The CMOS battery is not functional.
C. A failed integrated controller on the hard disk drive.
D. The volume boot record (VBR) is missing 55Ah.
E. Drive parameters in the BIOS are not set to auto.
Answer: A,B

certification CompTIA   JK0-702   JK0-702 examen   JK0-702 examen

NO.6 When using a cable select configuration for multiple ATA hard drives, which of the following pin
numbers is used to communicate the drive that is selected as master?
A. 20
B. 21
C. 28
D. 39
Answer: C

certification CompTIA   JK0-702   JK0-702   JK0-702

NO.7 Which of the following groups should a user be added to for the ability to restore files, without granting
any ownership privileges?
A. Remote Desktop Users
B. Power Users
C. Administrators
D. Backup Operators
Answer: D

certification CompTIA   JK0-702   JK0-702 examen   JK0-702

NO.8 A technician is troubleshooting software that was supposed to startup when the PC powered on. The
software failed to start.
Which of the following should the technician use to investigate the issue?
A. Sessions
B. System
C. Security
D. Application
Answer: D

certification CompTIA   JK0-702   JK0-702

NO.9 During POST a beep can be heard, and the computer does not boot.
Which of the following BEST describes the problem?
A. RAM failure
B. Power supply failure
C. Floppy drive failure
D. Hard drive failure
Answer: A

certification CompTIA   certification JK0-702   JK0-702

NO.10 Which of the following groups should staff accounts be placed in, if the staff is required to perform most
but not all maintenance tasks on a Windows PC?
A. Power Users
B. User
C. Administrator
D. Guest
Answer: A

CompTIA   JK0-702   JK0-702 examen   JK0-702   certification JK0-702

NO.11 A customer wants to change the file system on a Windows 2000 PC from FAT32 to NTFS without
destroying data.
Which of the following is correct?
A. From the command line run XCOPY *.* C: /M
B. From the command line run FORMAT C: /FS:NTFS
C. From the command line run XCOPY *.* C: /-Y
D. From the command line run CONVERT C: /FS:NTFS
Answer: D

certification CompTIA   JK0-702   JK0-702

NO.12 An assistant in a company unexpectedly falls ill the week before a major company merger. The
assistant was responsible for maintaining all of the files concerning the merger and used NTFS
permissions on the folders to keep them protected. No one has the passwords but the data must be
accessed immediately.
Which of the following would be the BEST method for the technician to access this data?
A. Log in as administrator and copy the files to the assistant's manager profile on the computer.
B. Log in as administrator and assign ownership of the files to the assistant's manager.
C. Log in as administrator and assign share rights of the files to the assistant's manager.
D. Log in as administrator and rename the assistant's profile to the manager's profile on the computer.
Answer: B

certification CompTIA   JK0-702   JK0-702 examen   JK0-702

NO.13 An inkjet printer has poor color registration.
Which of the following should be done FIRST to resolve the problem?
A. Clean the printheads.
B. Replace the toner.
C. Calibrate the device.
D. Replace the drum.
Answer: C

CompTIA   JK0-702 examen   JK0-702   JK0-702

NO.14 A technician is replacing a wireless router on an existing small office home office (SOHO) network. The
SSID, WPA and DHCP information has been correctly added.
Which of the following must also be addressed?
A. The administrative password needs to be changed.
B. The TKIP option needs to be enabled.
C. The WEP key needs to be changed.
D. Wireless access points need to be added.
Answer: A

certification CompTIA   JK0-702   JK0-702

NO.15 A technician is attempting to determine whether a CAT5 patch cord is a straight-through or a
crossover.
Which of the following is the BEST to use to determine the cord type?
A. Cable tester
B. Loopback cable
C. Multimeter
D. Extension magnet
Answer: A

CompTIA   JK0-702 examen   JK0-702   JK0-702 examen

NO.16 A customer reports that their sound is not working. They state that the speakers worked previously.
Which of the following should the technician check? (Select THREE).
A. Speakers are in regulatory compliance.
B. Speakers are on and the mute is off.
C. Ensure the speakers are on the Windows HCL.
D. Verify the system has enough hard drive space.
E. The audio driver is installed correctly.
F. Speakers are plugged into the correct jack.
Answer: B,E,F

CompTIA   JK0-702   JK0-702 examen

NO.17 Which of the following protocols would a technician use to run commands on a remote computer.?
A. NETBIOS
B. FTP
C. SMTP
D. TELNET
Answer: D

CompTIA   JK0-702 examen   JK0-702   JK0-702

NO.18 A technician needs to upgrade memory on a laptop with one available memory slot. The type and
amount of memory has been confirmed to be correct. Once the new memory is added, the BIOS reports
the original memory size.
Which of the following is the NEXT step to perform?
A. Replace all of the laptop's memory.
B. Reseat the laptop memory.
C. Perform a Windows Update.
D. Replace the motherboard.
Answer: B

CompTIA   JK0-702   JK0-702

NO.19 A user reports that email is working but they are unable to access the Internet. Which of the following is
the NEXT step in solving the issue?
A. Check the DNS server.
B. Check the DHCP server.
C. Verify the correct IP address.
D. Ensure the website is not blocked.
Answer: A

certification CompTIA   JK0-702 examen   JK0-702   JK0-702   JK0-702 examen

NO.20 A user is having trouble printing. The technician determines that the print queue has stalled and the
print spooler service has stopped.
Which of the following can be used to restart the print spooler?
A. Start>All Programs>Printing>Restart Spooler.
B. Restart the computer.
C. Start>Control Panel>Printers and Faxes>right click the name of the affected printer>Restart Spooler.
D. Start>Control Panel>Administrative Tools>Services>Select Print Spooler>Start.
Answer: D

CompTIA examen   JK0-702   JK0-702   certification JK0-702   JK0-702 examen

Choisir le Pass4Test vous permet non seulement à réussir le test CompTIA JK0-702, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A CompTIA JK0-702 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.


没有评论:

发表评论