Pass4Test est un bon site d'offrir la facilité aux candidats de test Juniper JN0-531. Selon les anciens test, l'outil de formation Juniper JN0-531 est bien proche de test réel.
Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Juniper JN0-531. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de JN0-531, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
Code d'Examen: JN0-531
Nom d'Examen: Juniper (FWV, Specailist(JNCIS-FWV))
Questions et réponses: 145 Q&As
Pass4Test a de formations plus nouvelles pour le test Juniper JN0-531. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Juniper JN0-531 à tous les candidats qui nous choisissent. L'importance de Certification Juniper JN0-531 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.
Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Juniper JN0-531 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Juniper JN0-531 réel est lancée. C'est possible à réussir 100% avec le produit de Juniper JN0-531. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
La Q&A Juniper JN0-531 de Pass4Test est liée bien avec le test réel de Juniper JN0-531. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Juniper JN0-531 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Juniper JN0-531 sans aucune doute si vous choisissez le Pass4Test.
Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Juniper JN0-531 est bien autorisé. Avec le certificat Juniper JN0-531, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Juniper JN0-531.
JN0-531 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-531.html
NO.1 You have implemented a hub and spoke VPN. On the hub, there are two tunnel interfaces, one to
each spoke. Both tunnel interfaces are in the same zone.
Which two configuration options will control traffic between the spokes? (Choose two.)
A. Configure the common zone to block inter-zone traffic.
B. Configure the common zone to block intra-zone traffic.
C. Configure each tunnel interface to block intra-zone traffic.
D. Configure one of the tunnel interfaces in a different zone a set policies.
Answer: BD
Juniper examen JN0-531 JN0-531
NO.2 A VPN tunnel that uses a CA certificate has failed Phase 1 negotiations. The peer's certificate has
been rejected.
What would be causing this problem?
A. The CA certificate has been revoked.
B. One of the peering devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B
Juniper JN0-531 examen JN0-531 JN0-531 JN0-531 examen JN0-531
NO.3 Which two statements regarding NHTB are correct? (Choose two.)
A. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the hub.
B. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the spoke.
C. When configuring routing on a spoke device with one tunnel interface the route to the tunnel interface
does not require a routing gateway address.
D. When configuring routing on a hub device with one tunnel interface terminating multiple VPN spokes,
the route to the tunnel interface does not require a routing gateway address.
Answer: AC
Juniper certification JN0-531 certification JN0-531 certification JN0-531
NO.4 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A. proxy-id, SA proposal list
B. IKE cookie, SA proposal list
C. hash [ID + Key], DH key exchange
D. SA proposal list, optional DH key exchange
Answer: AD
Juniper JN0-531 examen JN0-531 JN0-531
NO.5 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs and has intra-zone blocking enabled on
the Evil zone.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 3
B. 4
C. 6
D. 7
Answer: D
Juniper JN0-531 examen certification JN0-531 JN0-531
NO.6 What will happen if you type the command unset protocol vrouter trust-vr protocol ospf?
A. OSPF stops running, but the OSPF configuration is left intact.
B. All OSPF configuration parameters are removed from the vrouter only.
C. All OSPF configuration parameters are removed from all interfaces in the vrouter.
D. All OSPF configuration parameters are removed from the vrouter and from all interfaces in the vrouter.
Answer: D
Juniper JN0-531 certification JN0-531 JN0-531
NO.7 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A. messages 1 & 2
B. messages 2 & 3
C. messages 3 & 4
D. messages 5 & 6
Answer: D
Juniper JN0-531 JN0-531 JN0-531
NO.8 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A. set igmp interface ethernet0/1
B. set multicast interface ethernet0/1
C. set interface ethernet0/1 igmp router
D. set igmp interface ethernet0/1 enable
Answer: C
Juniper JN0-531 examen JN0-531 JN0-531
NO.9 What do you need to change in your VPN configuration to use certificates for authentication?
A. Replace the preshared key with the certificate name.
B. Select PFS in Phase 2, then select the certificate to be used.
C. Use a custom set of Phase 1 proposals, all beginning with rsa-.
D. Use a custom set of Phase 2 proposals, all beginning with rsa-.
Answer: C
Juniper certification JN0-531 certification JN0-531
NO.10 What must be configured differently for a route-based VPN and a policy-based VPN?
A. proxy-id
B. proposals
C. remote gateway type
D. binding the tunnel interface
Answer: D
certification Juniper JN0-531 JN0-531 examen JN0-531 JN0-531 examen certification JN0-531
NO.11 Which item in a virtual system is shared by default?
A. trust zone in the trust-vr
B. trust zone in the untrust-vr
C. untrust zone in the trust-vr
D. untrust zone in the untrust-vr
Answer: C
Juniper examen certification JN0-531 JN0-531 certification JN0-531 JN0-531
NO.12 You have configured the following on your device.
The VPN is not working properly. What is the problem?
A. The policy needs to have the action tunnel.
B. The VPN needs to be bound to the tunnel interface.
C. The tunnel interface needs to be placed in the trust zone.
D. The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B
Juniper JN0-531 certification JN0-531 JN0-531 certification JN0-531
NO.13 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A. get route pim
B. get igmp source all
C. exec pim interface all query
D. get vrouter trust-vr protocol pim
Answer: D
certification Juniper JN0-531 certification JN0-531 JN0-531 JN0-531 JN0-531
NO.14 You have created a VPN to a dynamic peer.
Which two configured parameters must match? (Choose two.)
A. static side peer-id
B. dynamic side local-id
C. static side IP address
D. dynamic side IP address
Answer: AB
Juniper examen certification JN0-531 JN0-531 certification JN0-531 certification JN0-531 JN0-531
NO.15 Which command is used to verify that IGMP is running correctly?
A. get route igmp
B. get igmp query
C. set igmp query interface e0/1
D. exec igmp interface e0/1 query
Answer: D
certification Juniper JN0-531 JN0-531
NO.16 Click the Exhibit button.
In the exhibit, the route-based VPN on the SSG 5 needs to configured to allow access only from your PC
to Server G. The SSG 550 is configured with a policy-based VPN from Server G to your PC's host
address.
Assume the gateways are static.
Which proxy-id must be configured?
A. Local: 10.0.0.5/24Remote: 20.0.0.5/24
B. Local: 10.0.0.5/32Remote: 20.0.0.5/32
C. Local: 1.1.1.250/32Remote: 4.4.4.250/32
D. Local: 1.1.1.250/24Remote: 4.4.4.250/24
Answer: B
Juniper certification JN0-531 certification JN0-531 JN0-531 JN0-531 examen JN0-531
NO.17 Your ScreenOS device has come under a SYN flood attack. In the logs, which severity level would you
search to see this event?
A. Alert
B. Critical
C. Warning
D. Emergency
Answer: D
certification Juniper JN0-531 JN0-531 certification JN0-531 JN0-531
NO.18 What must be enabled to protect Phase 2 key exchanges?
A. Phase 1 PFS
B. Phase 2 SHA
C. Phase 2 3-DES
D. Phase 2 DH key exchange
Answer: D
Juniper JN0-531 examen JN0-531 certification JN0-531 JN0-531
NO.19 A VPN tunnel that uses a CA certificate will not become active.
What would be causing this problem?
A. The CA certificate has been revoked.
B. The devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B
Juniper examen JN0-531 JN0-531
NO.20 Which three items do you need to download and install on your ScreenOS device for IKE gateways to
be able to use digital certificates without OCSP? (Choose three.)
A. the CRL list
B. the SCEP list
C. a local certificate
D. the CA public key certificate
E. the CA private key certificate
Answer: ACD
certification Juniper certification JN0-531 JN0-531 examen
NO.21 Which two statements are true regarding the use of dialup VPNs? (Choose two.)
A. They are initiated only by the remote host PC.
B. They can only be connected to the trust zone on a ScreenOS device.
C. They are configured so that the first IKE message will always have the SA proposal list.
D. They can be used as an alternative to connect remote users when a ScreenOS device has reached the
maximum number of LAN-to-LAN tunnels.
Answer: AC
Juniper certification JN0-531 JN0-531 JN0-531 examen JN0-531 examen JN0-531
NO.22 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A. zone
B. policy
C. interface
D. virtual router
E. virtual system
Answer: ACD
Juniper examen certification JN0-531 JN0-531
NO.23 You create a policy-based VPN, and select an address group for the source address.
What will be the source component of the proxy-id seen by the remote security gateway?
A. the default 0.0.0.0/0
B. the last member of the address group
C. the first member of the address group
D. the subnet that contains all addresses in the address group
Answer: A
Juniper JN0-531 JN0-531
NO.24 Which command will show address translation for sessions that have ended?
A. snoop
B. get session
C. get log traffic
D. get dbuf stream
Answer: C
Juniper JN0-531 examen JN0-531 examen JN0-531
NO.25 How many tunnels would need to be created to build a full mesh between 10 VPN devices?
A. 10
B. 20
C. 45
D. 100
Answer: C
certification Juniper certification JN0-531 JN0-531 JN0-531 examen JN0-531
NO.26 Which two statements are correct regarding NHTB? (Choose two.)
A. The NHTB table can be viewed with the command get nhtb.
B. The NHTB table can be viewed with the command get interface <tunnel interface>.
C. The NHTB table can be viewed with the command get interface <physical interface>.
D. NHTB is enabled automatically when multiple VPNs are bound to a single tunnel interface.
Answer: BD
Juniper certification JN0-531 certification JN0-531 JN0-531
NO.27 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A. 236.1.1.1
B. 10.10.10.1
C. 20.20.20.10
D. 20.20.20.200
Answer: B
certification Juniper JN0-531 JN0-531 examen JN0-531
NO.28 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 0
B. 3
C. 4
D. 6
Answer: A
Juniper examen JN0-531 examen JN0-531 JN0-531
NO.29 What should you configure to insure an HA cable failure does not result in both devices attempting to
become master?
A. failover count
B. secondary path
C. monitor threshold
D. heartbeat threshold
Answer: B
Juniper certification JN0-531 JN0-531
NO.30 Which three statements are true regarding IKE Phase 1? (Choose three.)
A. Placing the SA proposal list in message 1 is an option.
B. The digital certificate is used to decrypt the session key.
C. The DH key exchange is used to validate the session key.
D. The DH key exchange and digital certificates are both optional.
E. The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC
Juniper JN0-531 JN0-531 examen certification JN0-531 JN0-531
C'est pas facile à passer le test Certification Juniper JN0-531, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Juniper JN0-531 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Juniper JN0-531, vous allez passer le test Juniper JN0-531 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
没有评论:
发表评论