Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Alcatel-Lucent 4A0-107 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Alcatel-Lucent 4A0-107. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Alcatel-Lucent 4A0-107, vous aurez une meilleure préparation avec l'aide de Pass4Test.
Peut-être vous voyez les guides d'études similaires pour le test Alcatel-Lucent 4A0-107, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Alcatel-Lucent 4A0-107 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Alcatel-Lucent 4A0-107 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Alcatel-Lucent 4A0-107 réel est lancée. C'est possible à réussir 100% avec le produit de Alcatel-Lucent 4A0-107. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
Code d'Examen: 4A0-107
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Quality of Service)
Questions et réponses: 100 Q&As
Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.
Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification Alcatel-Lucent 4A0-107, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test Alcatel-Lucent 4A0-107 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.
Vous Alcatel-Lucent 4A0-107 pouvez télécharger le démo Alcatel-Lucent 4A0-107 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.
Certification Alcatel-Lucent 4A0-107 est un des tests plus importants dans le système de Certification Alcatel-Lucent. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Alcatel-Lucent 4A0-107 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.
4A0-107 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-107.html
NO.1 Which of the following are major components of QoS functionality on the Alcatel-Lucent 7750 SR?
(Choose three)
A. Microflow reservations using RSVP
B. DSCP to EXP translation
C. Traffic classification
D. Automatic profiling and policy configuration
E. Buffer memory management
F. Traffic scheduling
Answer: C,E,F
Alcatel-Lucent 4A0-107 4A0-107 examen 4A0-107 4A0-107 examen 4A0-107
NO.2 Which of the following BEST describes a SAP when regarding QoS?
A. A point in the network where EXP bits can be mapped to one of eight predefined FCs, each one with its
own queue.
B. A logical point in a service tunnel where all of customer traffic is aggregated.
C. A point at which the initial classification of customer traffic occurs.
D. A point in the network where QoS parameters are discarded in favor of lower-level hardware queuing
functions, such as LLI (Link Layer Interleave).
E. A point in the network where traffic flows from multiple different services are queued together, based on
forwarding class.
Answer: C
Alcatel-Lucent examen 4A0-107 examen 4A0-107 examen
NO.3 Individual application streams are considered microflows, whereas __________ are considered
macroflows.
A. SAPs
B. SDPs
C. Services
D. Queues
E. Schedulers
F. Forwarding classes
Answer: F
certification Alcatel-Lucent 4A0-107 examen certification 4A0-107 4A0-107 examen 4A0-107
NO.4 Which of the following are possible criteria for classifying packets at the network port ingress on the
Alcatel-Lucent 7750 SR? (Choose three)
A. The EXP bits in the MPLS header.
B. The packet's source and destination IP addresses.
C. The packet's DSCP bits.
D. The dot1p bits in the frame header.
E. The ID of an SDP that is transporting the packet.
Answer: A,C,D
certification Alcatel-Lucent 4A0-107 examen certification 4A0-107
NO.5 Which of the following are examples of metrics for QoS.?
A. Signal degradation, attenuation, line loss
B. Latency, FIFO, WRED
C. Delay, jitter, packet loss
D. SNR, queue depth, latency
E. Attenuation, dispersion, latency
Answer: C
Alcatel-Lucent 4A0-107 certification 4A0-107 4A0-107
NO.6 How many bits does DSCP use to provide QoS marking options?
A. 8
B. 16
C. 6
D. 4
E. 3
Answer: C
certification Alcatel-Lucent certification 4A0-107 4A0-107 examen certification 4A0-107
NO.7 What is an SLA? (Choose two)
A. An SLA is used to provide automated, real-time testing and alarming for throughput, latency, and jitter
across a provider's network.
B. An SLA is an agreement between a customer and a provider that dictates the treatment of customer
traffic across the provider's network.
C. An SLA allows customers to control all traffic within the service provider's network by prioritizing their
traffic over others as desired.
D. An SLA allows a customer to pre-mark traffic and ensure that traffic is treated as per the agreement
within the provider's network.
E. An SLA is a standard set of network QoS policies that a provider shares to all its customers, allowing
them to better understand the treatment of traffic within the provider's network.
Answer: B,D
certification Alcatel-Lucent 4A0-107 4A0-107
NO.8 What is the 6-bit binary representation of DSCP value AF21?
A. 010011
B. 100010
C. 010001
D. 001100
E. 010010
Answer: E
Alcatel-Lucent certification 4A0-107 4A0-107 4A0-107 examen certification 4A0-107
NO.9 The IP ToS field consists of ________ bits, of which ________are used. The _________most significant
(first) bits define precedence.
A. 8, 6, 3
B. 8, 8, 6
C. 16, 8, 4
D. 8, 6, 4
E. 24, 16, 8
Answer: A
certification Alcatel-Lucent 4A0-107 4A0-107 certification 4A0-107
NO.10 Which of the following are characteristics of DSCP? (Choose two)
A. DSCP is part of the Layer 3 header.
B. DSCP is a 6-bit field.
C. DSCP specifies eight different priorities.
D. DSCP specifies four precedence levels.
E. DSCP is part of the Layer 2 header
F. DSCP specifies 128 different per-hop behaviors.
Answer: A,B
Alcatel-Lucent examen certification 4A0-107 certification 4A0-107 certification 4A0-107 4A0-107
NO.11 Which of the following can be used as classifiers of customer traffic? (Choose three)
A. DSCP value
B. 802.1p value
C. IP DF bit
D. TCP/UDP port numbers
E. HTML version number
Answer: A,B,D
Alcatel-Lucent certification 4A0-107 4A0-107 certification 4A0-107 4A0-107 4A0-107
NO.12 Which of the following statements regarding DSCP bits are TRUE? (Choose three)
A. The three most significant (first) bits define 8 forwarding classes.
B. The three least significant (last) bits of the DSCP specify the drop probability.
C. The full 8 bits of the TOS field are used for DSCP.
D. To convert DSCP to IP precedence, the three most significant (first) bits are matched.
E. DSCP provides for eight drop probabilities.
Answer: A,B,D
Alcatel-Lucent 4A0-107 examen 4A0-107 4A0-107 examen
NO.13 What is the maximum number of SAP-ingress policies that can be applied on a SAP?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 8
Answer: A
Alcatel-Lucent 4A0-107 4A0-107 examen 4A0-107
NO.14 Which of the following are characteristics of 802.1p? (Choose two)
A. 802.1p adds 16 bits to the Layer 2 header,
B. 802.1p adds 16 bits to the Layer 3 header.
C. 802.1p specifies 64 different priority levels.
D. 802.1p uses a field in the 802.1Q header.
E. 802.1p uses a field in the Layer 3 IP header
F. 802.1p defines a 3-bit Class of Service field.
Answer: D,F
certification Alcatel-Lucent 4A0-107 examen 4A0-107 4A0-107
NO.15 Click the exhibit button below.
Based on the configuration shown below, name the forwarding class to be associated with a TCP packet
encapsulated inside an Ethernet frame that arrives on SAP 1/1/5 with the following characteristics:
Destination IP address = 120.110.1.1
TCP port number = 23
DSCP value = nc1
Dot1pvalue = 3
A. H2
B. NC
C. L2
D. EF
E. H1
F. BE
Answer: C
certification Alcatel-Lucent 4A0-107 4A0-107 4A0-107 4A0-107 examen
La Q&A Alcatel-Lucent 4A0-107 de Pass4Test est liée bien avec le test réel de Alcatel-Lucent 4A0-107. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Alcatel-Lucent 4A0-107 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.
没有评论:
发表评论